Support Scanners DS Series Epson DS-530

How do I load plastic cards in the input tray?

  • You can load plastic and laminated cards that meet the card specifications in the input tray.

    1. Open the input tray, pull out the output tray, and open the stopper.
    2. Slide the input tray edge guides all the way out.
    3. Load plastic or laminated cards printed side down and top edge first into the input tray horizontally, and slide them in until they meet resistance.

      Note: Do not load plastic cards vertically. (You can load one laminated card vertically, if necessary.)


    4. Slide the edge guides against the edges of the card.
    5. Turn off the Detect Double Feed setting on the Main Settings tab in Epson Scan 2 when scanning the cards.

      Note: If you do not disable the Detect Double Feed setting and a double feed error occurs, remove the plastic or laminated card from the input tray and then reload it. Press the double feed detection skip button to disable the Detect Double Feed feature, and scan again.

    Related references
    Plastic and Laminated Card Specifications
    Related information
    Scanning
Published:  Aug 31, 2016 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.