How do I print a nozzle check pattern?

• See below.

  Performing a Nozzle Check

  To maintain optimum print quality, perform a nozzle check before printing.

  Note:

  • If you are using the medium grooved platen, remove spacer A. Use only spacer B.
  • Make sure the Platen Gap setting is set to Auto.
  1. If the platen is not in the forward position, press the  moveable base button to move it forward.
  2. Remove the platen frame.
     
  3. Load media onto the platen you are using:
     • For L, M, or S size platens, use A4- or letter-size.
     • For XS size platens, use one sheet in 7.1 inch × 7.9 inch (180 mm × 200 mm) size.
     • For sleeve platens, use one sheet in 3.9 inch × 3.9 inch (100 mm × 100 mm) size.

     Note: The type of media depends on the Printer Mode you are using. For White ink mode, use transparent media, such as OHP film, or colored paper. For Color ink mode, use plain paper. If you are using the medium grooved platen, use thick paper. If you do not have thick paper, use a different platen.

  4. Position the media on the platen:
     • For L, M, S, and XS size platens, load media in the center.
       
     • For medium grooved platens, load media on the front-right side of the platen.
       
     • For sleeve platens, load media in the center of the raised section.
       

     Note: Make sure to place the media in the correct position for the platen you are using or the platen may be soiled with ink.

  5. Secure the corners with tape.
     
  6. Set the height adjustment lever to position P.
     
  7. Select Menu > Maintenance > Print Head Nozzle Check.
  8. Confirm that the pattern and platen settings match the type of nozzle check you want to perform. Select Print Settings and make any changes, if necessary.
  9. Select Start. The nozzle check pattern prints onto the paper.
  10. Remove the paper and check the printed pattern:
      • If there are no gaps in the pattern, the nozzles are clean.
        
      • If there are gaps in the pattern, clean the print head.
        
  11. Replace the platen frame.
  Related tasks
  Attaching or Removing Spacers
  Cleaning the Print Head
  Changing the Platen Height