Support Projectors PowerLite Series Epson PowerLite Pro Cinema 4040

Vertical bands, static, or noise appear in the image. What should I do?

  • If the projected image seems to contain electronic interference (noise) or static, try the following solutions:

    • Check the cables connecting your computer or video source to the projector. They should be:

      • Separated from the power cord to prevent interference
      • Securely connected at both ends
      • Not connected to an extension cable
      • No longer than 10 feet (3 m) for VGA/computer cables or 24 feet (7.3 m) for HDMI cables

    • Check the settings on the projector's Signal menu to make sure they match the video source.If available for your video source, adjust the Deinterlacing and Noise Reduction settings.
    • Select a computer video resolution and refresh rate that are compatible with the projector.
    • If you are projecting from a computer, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
    • If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.
    • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
    • Try turning off Frame Interpolation, or turn on Image Enhancement in the Image menu.
    Related references
    Image Quality Settings - Image Menu
    Input Signal Settings - Signal Menu
    Supported Video Display Formats
Published:  Aug 8, 2016 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.