How do I configure my product for rear and/or ceiling placement?

• Do the following:

  1. Press the Menu button.
  2. Select the Extended menu and press Enter ().
  3. Select Projection and press Enter ().
  4. Select one of the following settings:
     • Front (default setting) lets you project from a table in front of the screen.
     • Front/Upside Down flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
     • Rear flips the image horizontally to project from behind a translucent screen.
     • Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the ceiling and behind a translucent screen.

  You can also change the projection mode from Front to Front/Upside Down or from Rear to Rear/Upside Down by pressing and holding the A/V Mute button on the remote control for 5 seconds or until an image appears.

  Note: To project from overhead, you'll need the included direct mount hardware. If you are installing the projector on a lighting track, use only the optional lighting track mount .