What do my product's lights indicate?

• See the table below.

  Scanner Light Status

  You can often diagnose problems with your scanner by checking its lights.

  
  
  

  1	! error light
  2	automatic feeding mode light
  3	Ready light

  Light status	Condition/solution
  The ! error light is on and the ready light is flashing	A paper jam or a double feed has occurred. Remove any paper loaded in the input tray. If the light continues to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support.
  	The scanner cover is open. Make sure the scanner cover is closed and there is no jammed paper inside.
  The following lights are flashing separately or simultaneously: ready ! error	A fatal error has occurred. Try the following: Check the scanner connection to your computer to make sure it is secure. Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support.
  The ready light is off and any of the following lights are on: ! error  automatic feeding mode	The firmware update has failed and the scanner is in recovery mode. Try updating the firmware again.