How do I refill the ink tank?

• Make sure you have a new ink bottle handy and have read the ink safety precautions before you begin.

  You can continue to use the product even if the ink tank is not filled all the way.

  Caution:
  Wear disposable gloves while refilling the ink tank to avoid staining your hands. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains. If ink gets on your clothes or belongings, it may not come off.

  1. Open the printer cover.
     
     
  2. Hold down the  ink button until the  ink light starts flashing (approximately 5 seconds).
     
     The ink tank moves to the filling position (aligned with the triangle mark).
     
     

     Note: To cancel ink filling, hold down the  ink button.

  3. Open the ink tank cap.
     
     

     Warning: Do not reach into the product until all parts have stopped moving.

  4. Hold the ink bottle upright and slowly turn the bottle cap to remove it.
     
     

     Caution:
     Do not shake or squeeze the bottle. Do not touch the top of the bottle after removing its cap.

     Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Seek medical advice if problems persist. Keep the ink bottles out of the reach of children and do not drink the ink.

  5. Position the top of the ink bottle along the side of the filling port, then slowly stand the bottle upright to insert it.
     
     

     Caution:
     Do not allow the top of the ink bottle to touch any objects after removing the cap, or ink may spill.

     Note: Do not force the bottle into position.

  6. Wait for the ink to fill the tank. Ink flows into the tank and stops automatically when the ink fills to the upper line. Do not squeeze the bottle.
     
     

     Note: If ink does not flow from the bottle, lift and reinsert the bottle.

  7. Remove the ink bottle and securely close the ink tank cap as shown.
     
     

     Note: Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak. If any ink remains in the bottle, replace the bottle cap and tighten it. Store the bottle upright for later use.
     
     

  8. Close the printer cover.
     
     
  9. Hold down the  ink button until the  ink light starts flashing (approximately 5 seconds).
     
     When the  ink light turns off, the product is ready for use.
  Related references
  Ink Specifications