How do I connect my product to my wireless network using the product's control panel?

• See below.

  Selecting Wireless Network Settings from the Control Panel

  You can select or change wireless network settings using your product control panel.

  To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software. The installer program guides you through network setup.

  Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your network data and settings.

  1. Press the  home button, if necessary.
  2. Press the arrow buttons to select Wi-Fi Setup, then press the OK button.
     
     
  3. Press the OK button to select Wi-Fi (Recommended), then press the OK button again.
  4. Press the OK button to select Wi-Fi Setup Wizard, then press the OK button again.
  5. Press the arrow buttons to select the name of your wireless network and press the OK button. If you do not see your wireless network's name, press the  reset button to refresh the list. If it is still not displayed, you can enter it manually.

     Note: To enter the wireless network name manually, select Other SSIDs and press the OK button.

  6. Enter your wireless password (or network name and then password).
     
     

     Note: Use the arrow buttons on the control panel to navigate the on-screen keyboard, and press the OK button to select the desired character. The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters.

     • To move the cursor, select the left or right arrows.
     • To change the character case or enter numbers or symbols, select A1# or press the  reset button on the control panel.
     • To enter a space, select .
     • To delete the previous character, select .
     • When you finish entering characters, select OK and press the OK button.
  7. If you want to print a network connection report, press the  start button. (Otherwise, press the  stop button.)
  8. Press the  home button to return to the Home screen. The Wi-Fi icon displayed on the WiFi Setup screen indicates your wireless connection status. If the product is not connected to the network, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.
  Related tasks
  Entering Characters on the LCD Screen
  Related references
  Status Icon Information