My printout has lines running through it. What should I do?
-
If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint:
- Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
- Make sure the paper type setting matches the type of paper you loaded.
- Make sure you loaded the printable side of the paper correctly for your product.
- Turn off any high speed settings in your product software.
- Align the print head. If print quality does not improve after aligning the print head, disable the bidirectional (high speed) setting.
- Adjust the print quality in the product software.
- If you are copying from the ADF, copy from the scanner glass instead or use a higher quality setting.
- Clean any dust or dirt from your originals.
- Clean the ADF.
- When vertical banding appears or the paper is smeared, clean the paper path.
- You may need to replace the ink pack.
Print Head Nozzle Check
Print Head Cleaning
Related tasks
Selecting the Paper Settings for Each Source - Control Panel
Aligning the Print Head Using the Product Control Panel
Placing Originals on the Scanner Glass
Cleaning the Scanner Glass
Cleaning the Paper Guide
Removing and Installing the Ink Pack
Related references
Paper or Media Type Settings - Printing Software
Published: Oct 4, 2023
Was this helpful? Thank you for the feedback!