I see static or noise in the image. What should I do?

• Try the following solutions:
  • Check the cables connecting your computer or video source to the projector. They should be:
  • Separated from the power cord to prevent interference
  • Securely connected at both ends
  • Not connected to an extension cable
  • Check the settings on the projector's Signal menu to make sure they match the video source. If available for your video source, adjust the Progressive and Noise Reduction settings.
  • Select a computer video resolution that is compatible with the projector.
  • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the Tracking and Sync settings.
  • If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.
  • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
  Related references
  Signal Menu
  Supported Monitor Display