The product indicates an error. What should I do?

• The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here.

  

  1	Power light
  2	Status light
  3	Lamp light
  4	Temp (temperature) light

  Power light	Lamp light	Temp light	Status and solution
  Green	Off	Off	Normal operation.
  Flashing green	Off	Off	Warming up. Wait for an image to appear.
  Orange	Off	Off	Standby or sleep mode.
  Flashing orange	Off	Off	Shutting down. (When the light remains orange, you can unplug the projector.)
  Flashing red	Off	Flashing orange	Projector is too hot. Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. Clean or replace the air filter. Make sure the environmental temperature is not too hot.
  Red	Off	Red	Projector has overheated and turned off. Leave it turned off to cool down. Once the Temp light turns off and the power light turns orange (after about five minutes), try the suggestions below: Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. Clean or replace the air filter. If operating the projector at high altitude, turn on High Altitude Mode. If the problem persists, unplug the projector and contact Epson for help.
  Red	Flashing red	Off	Lamp has a problem. Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. Clean or replace the air filter. If operating the projector at high altitude, turn on High Altitude Mode. If the problem persists, unplug the projector and contact Epson for help.
  Light status varies	Flashing orange	Off	Replace the lamp soon to avoid damage. Do not continue using the projector.
  Red	Off	Flashing red	A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help.
  Red or flashing red	Flashing red	Flashing red	Internal projector error. Turn the projector off, unplug it, and contact Epson for help.

  Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help.

  Related references
  Cleaning the Air Filter and Vents
  Replacing the Air Filter
  Replacing the Lamp