How do I adjust the color for multiple projectors that project from the same source?

• See below.

  Matching the Screens Automatically

  You can automatically correct the brightness and tint for multiple projectors based on the brightness and tint settings you selected for the master projector.

  Before you start, make sure of the following:

  • Select Multi-Projection for the Color Mode setting and adjust the Brightness, Contrast, Color Saturation, Tint, White Balance, and Advanced settings in the Image menu, as necessary, on the master projector.
  • You are projecting on a matte white diffusion screen that is flat and even.
  • The projected image is between 100 to 300 inches (254 to 762 cm) and is rectangular after tiling.
  • All the projectors are connected to a network and the Location Setup setting has been configured.
  • Nothing is blocking the built-in camera on the front of each projector.
  • The projected images do not overlap or have gaps between them.
  • The projectors are installed parallel to the screen.
  • The Blend Range setting is set between 15 to 45%.

  Note: Auto adjustment is not available for the following lenses: ELPLR04, ELPLL08, or ELPLL07. After auto adjustment, the movement range for lens shift is reduced.

  1. Press the Menu button.
  2. Select the Extended menu and press Enter.
  3. Select the Multi-Projection setting and press Enter.
  4. Select the Screen Matching setting and press Enter.
  5. Select Start Auto Adjustment press Enter.
     
     When adjustment starts, you see an adjustment pattern. Adjustment is complete when you see a displayed image.

  After automatic adjustment, the Color Uniformity and Color Matching settings are returned to their default values.

  Related concepts
  Color Mode
  Related tasks
  Multiple Projector Adjustment Overview
  Configuring Tiling Automatically
  Related references
  Image Quality Settings - Image Menu
  Projector Parts - Front/Top
  

  Matching the Screens Manually

  You can manually correct the brightness and tint for multiple projectors.
  1. Press the Menu button.
  2. Select the Extended menu and press Enter.
  3. Select the Multi-Projection setting and press Enter.
  4. Select the Screen Matching setting and press Enter. You see this screen:
     
  5. Select the Color Matching setting and press Enter. You see this screen:
     
  6. Press the left or right arrow buttons to select a value for the Adjustment Level setting.

     Note: There are eight adjustment levels ranging from white to black and you can adjust each level individually.

  7. Press the left or right arrow buttons to adjust the color tone for the Red, Green, and Blue settings.
  8. Press the left or right arrow buttons to adjust the Brightness setting.
  9. Repeat the previous three steps as necessary to adjust each adjustment level.