Support Projectors PowerLite Series Epson PowerLite S27

Can my product do rear projection?

  • Yes, see below.

    Projection Modes

    Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly.

    • Front (default setting) lets you project from a table in front of the screen.
    • Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
    • Rear flips the image horizontally to project from behind a translucent screen.
    • Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind a translucent screen.

    Changing the Projection Mode Using the Remote Control

    You can change the projection mode to flip the image over top-to-bottom.
    1. Turn on the projector and display an image.
    2. Hold down the A/V Mute button on the remote control for five seconds.

      The image disappears briefly and reappears flipped top-to-bottom.
    3. To change projection back to the original mode, hold down the A/V Mute button for five seconds again.

    Changing the Projection Mode Using the Menus

    You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus.
    1. Turn on the projector and display an image.
    2. Press the Menu button.
    3. Select the Extended menu and press Enter.
    4. Select the Projection setting and press Enter.
    5. Select a projection mode and press Enter.
    6. Press Menu or Esc to exit the menus.
Published:  Mar 11, 2015 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.