Support Projectors PowerLite Series Epson PowerLite Pro G6570WU

How do I secure the HDMI cable on my product?

  • You can install the cable clips that came with your projector to provide additional support to the power and HDMI cables.

    Note:The PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU come with one cable clip.

    1. Connect the power and HDMI cables to the projector.
    2. Insert the end of the cable clip anchors into the cable clip slots near the power inlet and HDMI port.
       

      1 Cable clip slot
      2 Cable clip anchor
      3 Cable clip
    3. Place the open cable clips around the power and HDMI cables, but don't lock them into place.
    4. Slide each cable clip onto the anchors and lock the clips onto the power and HDMI connectors as shown.
    To remove the cable clips, open the clips and disconnect the cables. Then pinch the sides of each cable clip anchor and carefully pull them out of the cable clip slots.

    Related tasks
    Connecting to a Computer for HDMI Video and Audio
    Connecting to an HDMI Video Source
Published:  Mar 18, 2015 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.