Support Projectors PowerLite Series Epson PowerLite Pro G6270W

There is no sound. What should I do?

  • If there is no sound when you expect it or the volume is too low or high, try the following solutions:
    • Adjust the projector's volume settings.
    • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped.
    • Press the Source Search or Search button to switch to the correct input source, if necessary.
    • Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.
    • Check the audio cable connections between the projector and your video source.
    • If you do not hear sound from an HDMI source, set the connected device to PCM output.
    • Make sure any connected audio cables are labeled "No Resistance".
    • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable.
    • If you want to use a connected audio source when the projector is off, set the Standby Mode option to Communication On and make sure the A/V Settings options are set correctly.
    • You must connect external speakers to the projector to hear sound (PowerLite Pro G6870/G6970WU).
    • Make sure the Audio Settings option is set to the correct audio port for your video device.
    • If you turn the projector on immediately after turning it off, the cooling fans may run at high speed momentarily and cause an unexpected noise. This is normal.
    Related tasks
    Connecting to a Computer for Sound
    Connecting to a Video Source for Sound
    Connecting to External Speakers
    Related references
    Projector Setup Settings - Extended Menu
Published:  Mar 18, 2015 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.