Support Projectors Cinema Series Epson Pro Cinema 6050UB

The image appears stretched when I project from my computer. What should I do?

  • Try the following:

    • Press the Aspect button on the remote control to select Normal.

      Note: To select Anamorphic Wide or Horiz. Squeeze as the aspect ratio setting, you must have a commercially available anamorphic lens installed (Pro Cinema 6050 only).

      Note: If you're using an HDMI source, the aspect ratio cannot be changed from the projector because the input signal determines the image aspect ratio. Try changing the output resolution of the input signal instead.

    • Select a different image aspect ratio in the projector's Signal menu.

      Note: If you're using an HDMI source, the input signal determines the image aspect ratio. You cannot change the image aspect ratio. Try changing the output resolution of the input signal instead.

    • Set the projector's Auto Setup setting to On so the projector automatically optimizes the computer image quality.
    • Check your computer's display settings, disable dual display so that your image displays through the projector only, and set the resolution within the projector's limit. (See your computer manual for details.)
    • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting. (See your software help for details.)
    Related references
    Input Signal Settings - Signal Menu
Published:  Feb 14, 2019 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.