Support Projectors Cinema Series Epson Home Cinema 4010

How do I set up the projector to automatically detect and display a 4K HDR signal?

  • Connect your image source to the projector's HDMI1 port. In the Signal menu, select Advanced and set the Color Space and Dynamic Range settings to Auto.

    The projector will automatically detect and display compatible signals only. If you don't see an image, check the projector's Info menu to make sure you are sending a compatible 4K HDR signal to the projector. If the Color Format section of the Info menu does not display 4K BT.2020 and HDR, the signal is not compatible. See the table below for a list of signals compatible with your projector.

    Compatible Signals

    Display format (refresh rate) Chroma subsampling (pixel encoding) Color depth: 24 bits (8-bit per pixel) Color depth: 30 bits (10-bit per pixel) Color depth: 36 bits (12-bit per pixel)
    4K/60p (60 Hz) 4:4:4 SDR SDR SDR
    4:2:2 SDR SDR SDR
    4:2:0 SDR SDR SDR
    4K/24p (24 Hz) 4:4:4 SDR SDR SDR
    4:2:2 SDR HDR HDR*
    4:2:0 This signal does not exist.

    *This signal is processed at 4:2:2 10-bit.

    You can also check your equipment's documentation for HDR output signal compatibility or contact your provider for 4K HDR streaming signal compatibility.

Published:  Aug 23, 2018 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.