Support Projectors PowerLite Series Epson PowerLite EB-725W

Part of my image is blurry or out of focus. What should I do?

  • If the projected image is fuzzy or blurry, try the following solutions:

    • Adjust the image focus.
    • Clean the projection window.

      Note: To avoid condensation on the projection window after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

    • Position the projector close enough to the screen, and directly in front of it.
    • Make sure your screen is flat. Try projecting on another surface.
    • Verify that the throw distance from the projector to your projection surface meets the specifications in your projector's online Installation Guide.
    • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
    • Adjust the Sharpness setting to improve image quality.
    • If you are projecting from a computer using a VGA cable, press the Auto button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
    • If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to match the projector's native resolution, if possible.
    Related tasks
    Cleaning the Projection Window
    Focusing the Image
    Related references
    Image Quality Settings - Image Menu
Published:  Nov 16, 2020 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.