Support Projectors PowerLite Series Epson PowerLite EB-725W

The image is too dark or light, or the colors are incorrect. What should I do?

  • If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

    • Press the Color Mode button on the remote control to try different color modes for the image and environment.
    • Check your video source settings.
    • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, White Balance, Color Saturation and RGBCMY.
    • Make sure you selected the correct Signal Format setting in the Signal I/O menu, if available for your video source.
    • Set the Video Range setting in the Signal I/O menu to Auto, if available for your image source.
    • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.
    • Position the projector close enough to the screen.
    • Make sure you have run the Light Source Calibration in the Management menu recently. If using multiple projectors, perform the calibration on all projectors to ensure a consistent image quality.
    Related references
    Input Signal Settings - Signal I/O Menu
    Administration Settings - Management Menu
    Image Quality Settings - Image Menu
Published:  Nov 16, 2020 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.