Support Projectors PowerLite Series Epson PowerLite EB-L520W

Vertical bands, static, or noise appear in the image. What should I do?

  • If the projected image seems to contain electronic interference (noise) or static, try the following solutions:

    • Check the cables connecting your computer or video source to the projector. They should be:
      • Separated from the power cord to prevent interference
      • Securely connected at both ends
      • Not connected to an extension cable
    • If you adjusted the image shape, adjust the Sharpness setting in the Image menu.
    • Check the settings on the projector's Signal menu to make sure they match the video source. If available for your video source, adjust the Deinterlacing and Noise Reduction settings.
    • If available for your video source, select Auto as the Resolution setting in the Signal menu.
    • Select a computer video resolution and refresh rate that are compatible with the projector.
    • Clean the projector lens.
    • If you are projecting from a computer using a VGA cable, press the Auto button on the remote control to automatically adjust the tracking and sync. If the problem remains, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
    • Make sure the correct Video Range or EDID settings are selected in the Signal menu.
    Related references
    Image Quality Settings - Image Menu
    Input Signal Settings - Signal Menu
    Supported Video Display Formats
Published:  Aug 19, 2021 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.