-
Printers
Printers
- Home & Photo
- Office Printers & Copiers
- Professional Imaging
- Label Printers & Presses
Office Printers & CopiersProfessional ImagingLabel Printers & PressesResourcesApplications - Ink
-
Projectors
Home EntertainmentResourcesBusiness & EducationApplicationsLarge VenueResourcesApplications
- Scanners
-
Point of Sale
Receipt PrintersApplicationsLabel PrintersApplicationsCheck ScannersApplicationsKitchen Display SystemsResourcesApplicationsSAT
-
Robots
Industries
- Industries
- Support
Downloads not available on mobile devices.
Please select your operating system above.
** By downloading from this website, you are agreeing to abide by the terms and conditions of Epson's Software License Agreement.
- Top FAQs
- Cloud or Mobile
- Connection or Setup
- Error Messages or Lights
- Image Quality or Appearance
- Interactive Features
- Maintenance
- Remote Control or Projector Buttons
- Setup
- Software
- Sound
- Wireless or Wired Connection
- Other
- How do I set up my projector?
- How do I change the image source?
- The product's light(s) indicate an error. What should I do?
- How do I connect speakers to the product?
- I forgot the projector's password. What should I do?
- My finger touch position is not accurate. What should I do?
- The finger touch interactivity does not work. What should I do?
- How do I connect my image source to the product?
- How do I calibrate my projector?
- How do I clean the obstacle sensor?
- No image or the incorrect image displays when I project through a USB connection. What should I do?
- How do I connect my image source to the product?
- How do I connect speakers to the product?
- How do I set a password on my product?
- How do I change the image source?
- How do I set up my projector?
- Nothing is projected on the screen. What should I do?
- How do I project two images simultaneously?
- How do I connect a USB device or camera to the projector?
- Which USB extension cables can I use with my product?
- Is there a recommended sequence for turning on the projector and other equipment?
- How do I project images from a USB device?
- How do I display the same image on a projection screen and a computer monitor or laptop at the same time?
- How do I connect my product over a network with the EasyMP Multi PC Projection software?
- Can I place the projector on a table instead of mounting it on a wall?
- How do I set my product settings for rear and/or ceiling placement?
- What is the remote desktop connection and how do I use it?
- Can I project images from multiple devices at the same time?
- Does my product support Intel WiDi?
- How do I mount my projector on the wall?
- I am unable to change the image source. What should I do?
- How do I connect my projector to a Mac?
- Can I use the Connect to a Network Projector function in Windows 7 or Windows Vista to connect to my network projector?
- Can I attach other USB devices to the port for the wireless LAN module?
- How do I project an image from my Chromebook?
- The image is too dark or light, or the colors are incorrect. What should I do?
- The displayed image is not rectangular. What should I do?
- Vertical bands, static, or noise appear in the image. What should I do?
- Part of my image is blurry or out of focus. What should I do?
- What do the different Color Modes do?
- How do I adjust the color for multiple projectors that project from the same source?
- My displayed image appears jittery or shaky when I connect a DVD player to the projector's Video port. What should I do?
- How can I improve the image quality?
- I see a color cast over the projected image. What should I do?
- The image from my computer appears stretched when it's projected. What should I do?
- The projected image from a 16:10 projector does not fit on a 16:9 screen. What should I do?
- A black box appears where a video should appear when I project from my computer. What should I do?
- I am having trouble manually calibrating my system. What should I do?
- My interactive pen is hard to use. What should I do?
- When writing with two pens, the pens skip and break up. What should I do?
- The pens are difficult to use or slow to respond when I use them with multiple projectors of the same model in the same room. What should I do?
- The finger touch interactivity does not work. What should I do?
- The pen position is not accurate. What should I do?
- I don't see the Start Inking option in my Microsoft Office application. What should I do?
- The cursor location and pen position do not match. It is difficult to join lines, annotate, or select objects. What should I do?
- The time is incorrect in the Whiteboard Settings. What should I do?
- My interactive pen doesn't work. It lags, skips, or does not write on the projected image. What should I do?
- The interactive pens are causing interference and unwanted effects. What should I do?
- How do I calibrate my projector?
- My finger touch position is not accurate. What should I do?
- The pen does not work over a network. What should I do?
- Are the projector's interactive features supported with a wireless connection?
- How far apart should two pens be when I use them to write?
- Do I need to connect a computer or video device to the projector to annotate?
- Do I need to install the Easy Interactive Driver on my computer to use the interactive features?
- Can I replace the tip of the interactive pen?
- Do the projector's interactive features work with Linux?
- When should I recalibrate the projector?
- Why do I need to calibrate before I use the interactive pens for the first time?
- Can I use the projector with my existing standard or interactive whiteboard?
- Can I buy additional interactive pens?
- Can I use the interactive pen or my finger to control the projector's menus and select settings?
- The interactive pen doesn't work correctly when I use the SMART Notebook software. What should I do?
- Can I use the pen as a mouse to control my computer from the projected screen over a network connection?
- Can I draw seamlessly across and interact with two adjacent images that are projected by two projectors?
- How do I make sure the projection surface is flat enough for finger touch interactivity?
- Can I use two same-color pens at the same time?
- How do I turn off the projector's built-in toolbar?
- When should I recalibrate the interactive pens?
- Can I turn off the Hovering feature?
- Do infrared (IR) devices interfere with the product's interactive pens?
- How do I use my projector's touch screen if I set up an extended desktop on my Chromebook?
- When and how should I clean or replace the air filter?
- How do I clean the obstacle sensor?
- How do I clean the projection window?
- How do I reset the lamp timer?
- How do I replace the lamp?
- How should I clean the projector case?
- Can I access the lamp and air filter while the projector is mounted on the wall or ceiling?
- The remote control doesn't work. What should I do?
- How do I obtain a replacement remote control?
- The remote control doesn't work as a wireless mouse. What should I do?
- The product's buttons don't work. What should I do?
- Can I use the remote control to click through a slideshow presentation?
- The product's buttons don't work. What should I do?
- How do I enter an IP address with the numeric key pad on the remote control?
- Can I access my product from different operating systems on the same network?
- Which interactive software comes with the projector?
- Is the Easy Interactive Tools software supported in Linux?
- Can I run the USB Display and Easy Interactive Tools software at the same time?
- Can I monitor or control my product from Windows Explorer on a Windows computer?
- I want to install the EasyMP Multi PC Projection utility but I can't find it. What should I do?
- Which wireless security protocols does my product support?
- Which software supports dual pens?
- I can't use the Easy Interactive Tools software with the QuickTime Player in full-screen mode. What should I do?
- What is the Easy Interactive Driver?
- Where can I get the latest software for my projector?
- How do I uninstall the Easy Interactive Driver on my Mac?
- Can I use interactive software that did not come with my projector?
- What is Easy Interactive Tools?
- How do I install the USB Display software on my computer?
- Where can I find more information on SMART Notebook software?
- How do I uninstall Easy Interactive Tools?
- Where can I find instructions on using the Epson iProjection software for Windows or a Mac computer?
- How do I calibrate Pen and Touch when using the extended desktop in Windows?
- My projector screen displays my extended desktop when I use iProjection in Windows. How can I mirror or duplicate the display?
- My projector displays a black desktop when I project from a LAN source with Epson iProjection running macOS 10.15.x, 11.x, 12.x, 13.x, or 14.x. What should I do?
- There is no sound. What should I do?
- There is no audio when my product is in standby mode or off and the A/V Output setting is enabled. What should I do?
- How do I play sound through my product?
- Can I output audio from the internal or external speakers when the projector is in standby mode or off?
- Does my projector support audio over a network connection?
- Which user replaceable parts or accessories are available for my product?
- I'm having difficulty Capturing, Printing, Saving, or Scanning. What should I do?
- I forgot the projector's password. What should I do?
- How should I transport the product?
- Does Epson have longer cables available for purchase?
- The product won't go into sleep mode. What should I do?
- I set up my projector to email whiteboard pages, but my test email fails to send. What should I do?
- Which printers can I use to print whiteboard pages from my projector?
- Can I use a Bluetooth or USB keyboard to control the projector's menus and select settings?
- What is the warranty on the interactive pens?
- What security measures does Epson recommend for its network products?
This document contains an overview of the product, specifications, basic and in-depth usage instructions, and information on using options.
DuoLink Installation/Image Size Calculator ZIP
This Zip file contains a Microsoft Excel formatted file used to calculate the screen size for multi-projection installations.
Note: This calculator is a convenient tool for estimation only and is not intended to provide exact measurements.
This guide explains how to set up your computer and two BrightLink projectors to use DuoLink.
DuoLink is a BrightLink feature that lets you draw seamlessly across the projected images of two adjacent projectors.
This Zip file contains the Microsoft Excel formatted ESC/VP21 Command List with command codes which are used to remotely control Epson projectors, along with the PDF Guide.
This document contains tips for using Easy Interactive Tools.
Display wirelessly to Epson Projectors with Epson iProjection
This document provides quick reference for common uses of your product.
This document will assist you with product installation using the optional Whiteboard and Wall Mount System for BrightLink Pro (AN3WA100).
This guide describes how to mount the Touch Unit and Control Pad for use with your Epson projector.
This document will assist you with installation using the Ultra-Short Throw Wall Mount (ELPMB46).
Contains the templates to use when mounting a projector with either the ELPMB46 or ELPMB53 mounts. Be sure to use the mount that is compatible with your projector.
Note: For accurate placement, make sure you print these sheets at full size. Do not reduce or enlarge.
This document contains in-depth usage instructions for the software.
This document contains an overview of using the EasyMP Multi PC Projection utility.
This document contains information about Setting up and using EasyMP Network Updater.
This document contains information about Setting up and using EasyMP Network Updater.
This document contains an overview, and usage instructions for Epson Projector Management Utility (formerly named EasyMP Monitor Utility).
Guides for previous software versions are listed below.
Epson Projector Management v5.20 | v5.10 | v5.0
EasyMP Monitor Utility v4.57 | v4.56 | v4.54 | v4.53 | v4.52 | v4.51 | v4.50 | v4.40
This document contains an overview of using Epson iProjection utility (Formerly named EasyMP Multi PC Projection).
This document contains important information for measuring projection surface flatness to ensure optimal touch performance.
This guide provides information for selecting a compatible mount.
This document describes Epson's limited warranty for this product (warranty valid in the U.S. and Canada).
Contact Us
Mail :
3131 Katela Ave
Los Alamitos CA 90720